一、List使用
引入头文件#include
List基本函数
Lists将元素按顺序储存在链表中. 与 向量(vectors)相比, 它允许快速的插入和删除,但是随机访问却比较慢.
assign() 给list赋值
back() 返回最后一个元素
begin() 返回指向第一个元素的迭代器
clear() 删除所有元素
empty() 如果list是空的则返回true
end() 返回末尾的迭代器
erase() 删除一个元素
front() 返回第一个元素
get_allocator() 返回list的配置器
insert() 插入一个元素到list中
max_size() 返回list能容纳的最大元素数量
merge() 合并两个list
pop_back() 删除最后一个元素
pop_front() 删除第一个元素
push_back() 在list的末尾添加一个元素
push_front() 在list的头部添加一个元素
rbegin() 返回指向第一个元素的逆向迭代器
remove() 从list删除元素
remove_if() 按指定条件删除元素
rend() 指向list末尾的逆向迭代器
resize() 改变list的大小
reverse() 把list的元素倒转
size() 返回list中的元素个数
sort() 给list排序
splice() 合并两个list
swap() 交换两个list
unique() 删除list中重复的元素
举例说明:
#include <iostream>
#include <list>
using namespace std;
typedef list<int> INTLIST;
//从前向后显示list队列的全部元素
void put_list(INTLIST list, string name)
{
INTLIST::iterator plist;
cout << "The contents of " << name << " : ";
for(plist = list.begin(); plist != list.end(); plist++)
cout << *plist << " ";
cout<<endl;
}
//测试list容器的功能
int main()
{
//list1对象初始为空
INTLIST list1;
//list2对象最初有10个值为6的元素
INTLIST list2(10,6);
//list3对象最初有9个值为6的元素
INTLIST list3(list2.begin(),--list2.end());
//声明一个名为i的双向迭代器
INTLIST::iterator i;
//从前向后显示各list对象的元素
put_list(list1,"list1");
put_list(list2,"list2");
put_list(list3,"list3");
//从list1序列后面添加两个元素
list1.push_back(2);
list1.push_back(4);
cout<<"list1.push_back(2) and list1.push_back(4):"<<endl;
put_list(list1,"list1");
//从list1序列前面添加两个元素
list1.push_front(5);
list1.push_front(7);
cout<<"list1.push_front(5) and list1.push_front(7):"<<endl;
put_list(list1,"list1");
//在list1序列中间插入数据 插入3个9
list1.insert(++list1.begin(),3,9);
cout<<"list1.insert(list1.begin()+1,3,9):"<<endl;
put_list(list1,"list1");
//测试引用类函数 输出第一个元素和最后一个元素
cout<<"list1.front()="<<list1.front()<<endl;
cout<<"list1.back()="<<list1.back()<<endl;
//从list1序列的前后各移去一个元素 删除元素
list1.pop_front();
list1.pop_back();
cout<<"list1.pop_front() and list1.pop_back():"<<endl;
put_list(list1,"list1");
//清除list1中的第2个元素
list1.erase(++list1.begin());
cout<<"list1.erase(++list1.begin()):"<<endl;
put_list(list1,"list1");
//对list2赋值并显示
list2.assign(8,1);
cout<<"list2.assign(8,1):"<<endl;
put_list(list2,"list2");
//显示序列的状态信息
cout<<"list1.max_size(): "<<list1.max_size()<<endl;
cout<<"list1.size(): "<<list1.size()<<endl;
cout<<"list1.empty(): "<<list1.empty()<<endl;
//list序列容器的运算
put_list(list1,"list1");
put_list(list3,"list3");
cout<<"list1>list3: "<<(list1>list3)<<endl;
cout<<"list1<list3: "<<(list1<list3)<<endl;
//对list1容器排序
list1.sort();
put_list(list1,"list1");
//结合处理 合并list
list1.splice(++list1.begin(), list3);
put_list(list1,"list1");
put_list(list3,"list3");
return 0;
}
输出结果如下:
The contents of list1 :
The contents of list2 : 6 6 6 6 6 6 6 6 6 6
The contents of list3 : 6 6 6 6 6 6 6 6 6
list1.push_back(2) and list1.push_back(4):
The contents of list1 : 2 4
list1.push_front(5) and list1.push_front(7):
The contents of list1 : 7 5 2 4
list1.insert(list1.begin()+1,3,9):
The contents of list1 : 7 9 9 9 5 2 4
list1.front()=7
list1.back()=4
list1.pop_front() and list1.pop_back():
The contents of list1 : 9 9 9 5 2
list1.erase(++list1.begin()):
The contents of list1 : 9 9 5 2
list2.assign(8,1):
The contents of list2 : 1 1 1 1 1 1 1 1
list1.max_size(): 1073741823
list1.size(): 4
list1.empty(): 0
The contents of list1 : 9 9 5 2
The contents of list3 : 6 6 6 6 6 6 6 6 6
list1>list3: 1
list1<list3: 0
The contents of list1 : 2 5 9 9
The contents of list1 : 2 6 6 6 6 6 6 6 6 6 5 9 9
The contents of list3 :
二、Vector使用
在c++中,vector是一个十分有用的容器,下面对这个容器做一下总结。
1 基本操作
(1)头文件#include
(2)创建vector对象,vector
(3)尾部插入数字:vec.push_back(a);
(4)使用下标访问元素,cout<<vec[0]<<endl;记住下标是从0开始的。
(5)使用迭代器访问元素.
vector<int>::iterator it;
for(it=vec.begin();it!=vec.end();it++)
cout<<*it<<endl;
(6)插入元素: vec.insert(vec.begin()+i,a);在第i+1个元素前面插入a;
(7)删除元素: vec.erase(vec.begin()+2);删除第3个元素
vec.erase(vec.begin()+i,vec.end()+j);删除区间[i,j-1];区间从0开始
(8)向量大小:vec.size();
(9)清空:vec.clear();
2、结构体作为vector元素
vector的元素不仅仅可以使int,double,string,还可以是结构体,但是要注意:结构体要定义为全局的,否则会出错。下面是一段简短的程序代码:
#include<stdio.h>
#include<algorithm>
#include<vector>
#include<iostream>
using namespace std;
typedef struct rect
{
int id;
int length;
int width; //对于向量元素是结构体的,可在结构体内部定义比较函数,下面按照id,length,width升序排序。 bool operator< (const rect &a) const { if(id!=a.id) return id<a.id; else { if(length!=a.length) return length<a.length; else return width<a.width; } }
}Rect;
int main()
{
vector<Rect> vec;
Rect rect;
rect.id=1;
rect.length=2;
rect.width=3;
vec.push_back(rect);
vector<Rect>::iterator it=vec.begin();
cout<<(*it).id<<' '<<(*it).length<<' '<<(*it).width<<endl;
return 0;
}
(1) 使用reverse将元素翻转:需要头文件#include
reverse(vec.begin(),vec.end());将元素翻转(在vector中,如果一个函数中需要两个迭代器,
一般后一个都不包含.)
(2)使用sort排序:需要头文件#include
sort(vec.begin(),vec.end());(默认是按升序排列,即从小到大).
可以通过重写排序比较函数按照降序比较,如下:
定义排序比较函数:
bool Comp(const int &a,const int &b)
{
return a>b;
}
调用时:sort(vec.begin(),vec.end(),Comp),这样就降序排序。
4、lower_bound()与up_bound()使用
// lower_bound/upper_bound example
#include <iostream> // std::cout
#include <algorithm> // std::lower_bound, std::upper_bound, std::sort
#include <vector> // std::vector
int main () {
int myints[] = {10,20,30,30,20,10,10,20};
std::vector<int> v(myints,myints+8); // 10 20 30 30 20 10 10 20
std::sort (v.begin(), v.end()); // 10 10 10 20 20 20 30 30
std::vector<int>::iterator low,up;
low=std::lower_bound (v.begin(), v.end(), 10); // ^
up= std::upper_bound (v.begin(), v.end(), 10); // ^
std::cout << "lower_bound at position " << (low- v.begin()) << 'n';
std::cout << "upper_bound at position " << (up - v.begin()) << 'n';
std::cout << *low<<" "<<*up;
return 0;
}
三、vector与list区别
c++标准库中,容器vector和list都可以用来存放一组类型相同的数据。而且二者不同于数组的一点是,支持动态增长。但它们还是有有几点不同
(1) vector是顺序表,表示的是一块连续的内存,元素被顺序存储;list是双向连接表,在内存中不一定连续。
(2)当数值内存不够时,vector会重新申请一块足够大的连续内存,把原来的数据拷贝到新的内存里面;list因为不用考虑内存的连续,因此新增开销比vector小。
(3)list只能通过指针访问元素,随机访问元素的效率特别低,在需要频繁随机存取元素时,使用vector更加合适。
(4)当向vector插入或者删除一个元素时,需要复制移动待插入元素右边的所有元素;因此在有频繁插入删除操作时,使用list更加合适。
四、stack使用
引入头文件
#include
stack
s.push()
s.pop()
s.top()
s.empty()
s.size()
五、Queue的使用
引入头文件
include
定义queue 对象的示例代码如下:
queue q1;
queue q2;
定义queue 对象的示例代码如下:
queue
queue
queue 的基本操作有:
入队,如例:q.push(x); 将x 接到队列的末端。
出队,如例:q.pop(); 弹出队列的第一个元素,注意,并不会返回被弹出元素的值。
访问队首元素,如例:q.front(),即最早被压入队列的元素。
访问队尾元素,如例:q.back(),即最后被压入队列的元素。
判断队列空,如例:q.empty(),当队列空时,返回true。
访问队列中的元素个数,如例:q.size()
原文链接: https://www.cnblogs.com/likailiche/p/4897145.html
欢迎关注
微信关注下方公众号,第一时间获取干货硬货;公众号内回复【pdf】免费获取数百本计算机经典书籍
原创文章受到原创版权保护。转载请注明出处:https://www.ccppcoding.com/archives/223439
非原创文章文中已经注明原地址,如有侵权,联系删除
关注公众号【高性能架构探索】,第一时间获取最新文章
转载文章受原作者版权保护。转载请注明原作者出处!